multiple section

1. What is multiple section?
2. How do I activate multiple sections in Sketchup?
3. How do I cut multiple sections in Sketchup?
4. How do you add a section box in Sketchup?
5. How do I see all sections in Sketchup?
6. What are sample lines in Civil 3D?
7. How do I create a section view in Civil 3D 2018?
8. How do I add a surface to an existing section view in Civil 3D?
9. Can you have 2 active section cuts in Sketchup?
10. How do you toggle a section plane in Sketchup?

What is multiple section?

The multiple section views are created from existing sections, which represent sectional data at the stations along the alignment. You can also display data bands above or below each of the multiple section views. ... For information about how to create a material list, see Generating Material Lists.

How do I activate multiple sections in Sketchup?

To use simultaneously active planes, the trick is to group your model with a section plane and create another one outside the group. Create the first section plane, and place it at the desired position. To avoid letting any part of the model out, double-click the first section plane to de-activate it.

How do I cut multiple sections in Sketchup?

If you do not want to section the whole model, just to cut a component or group again, then wrap the object in an outer group, and add a section plane to this group wrapper. adjust it as needed, and make it active. (The other section plane would be inside the inner group.)

How do you add a section box in Sketchup?

To add a section plane, follow these steps:

1. Choose Tools, Section Plane to activate the Section Plane tool. ...
2. Move the Section Plane tool around your model. ...
3. After you figure out where you want to cut, click once to add a section plane. ...
4. Choose the Move tool.

How do I see all sections in Sketchup?

Have a look at the Styles window area and under the Edit > Modeling area you will see the ability turn on/off the Section Planes variable. Thanks for your reply.

What are sample lines in Civil 3D?

In Civil 3D, section data is defined and displayed using sample lines grouped in a collection called a sample line group. The Civil 3d sample line creation wizard allows us to create cross-sections. We can create them at given intervals, and at a specified left and right distance from the alignment centerline.

How do I create a section view in Civil 3D 2018?

To create multiple quick cross sections along a baseline

1. In the Toolspace, on the Toolbox tab, expand Miscellaneous Utilities Surfaces. ...
2. When prompted for an option, enter Multiple.
3. In the drawing, pick points to draw a baseline.
4. Press Enter to finish drawing.
5. Enter a sampling interval.
6. Enter a left swath width.

How do I add a surface to an existing section view in Civil 3D?

​​​From Home ribbon click the Create Design panel, click Profile and choose Create Surface Profile. Expand and select the alignment that was used to create the initial profile view. Once alignment is selected, find and highlight the desired surface in the right Select Surfaces area. Click Add to sample this surface.

Can you have 2 active section cuts in Sketchup?

[Quick Win] How to create two active section cuts at once

As long as section cuts are places inside separate Groups or Components, then you can add as many as you like.

How do you toggle a section plane in Sketchup?

Open the Outliner window. Click on the current section plane and deactivate it, then select the other section plane and activate it. You can also move the camera, select the section plane in model, activate it and then untick and re-tick Active section plane in the Scenes panel.